Aquatec Auto Flush Timer/Flow Restrictor Series are engineered to maximize system efficiency and prolong membrane life. These components utilize a normally closed solenoid valve which automatically “power flushes” the membrane upon start-up and then subsequently for 15-20 seconds every hour.This turbulent water action removes organic and inorganic contaminants from the membrane surface. Any standing, idle water in the membrane module is automatically purged to the drain.
Virtually all system manufacturers recommend that their membranes be flushed regularly to insure proper performance and extended membrane life. The AFT and AFR Series perform this process seamlessly and automatically. The AFT and AFR Series also include a modular connector for plug-and-play integration with Aquatec’s other system components.
If you do not have an Aquatec Pump, use Transformer TACS114-48 to connect the Auto Flush Timer.
If you are adding an Auto Flush Timer and you currently have an Aquatec Pump, You will need to purchase the 3-Way Harness (21-127) listed below.
