5-Micron Sediment Filter FLTR-1010 Compatible.

Purtrex' true graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translated to longer life and fewer change-outs than existing string wound or resin-bonded filters. Purtrex filters meet the requirements of the FDA for food and beverage contact. 40 per case. Sold individually.
Click Here For More Info On PurTrex Filters 

GAC Carbon Prefilter FLTR-3900 Compatible.

The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon before exiting the other end of the cartridge. An internal expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helps remove carbon fines and other suspended particles from the filtered water. CC-10 cartridges effectively provide good general-purpose drinking water filtration. 12 per case. Sold Individually.
Click Here For More Info On Pentek/Ametek CC-Series Filters 

CTO Carbon Block Post Filter FLTR-2112 Compatible.

5 Micron Nominal Filtration
High Adsorptive Capacity and Efficiency
Efficient Sediment Filter
No Release of Carbon Fines
Competitively Priced vs. GAC Filters
Performance Tested and Verified by Independent Laboratory Testing

MATRIKX® +CTO/2 filters are the most widely used carbon block devices in the world and provide previously unattainable performance at the lowest price point. +CTO/2 filters simultaneously remove free chlorine and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter.

The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables a +CTO/2 filter to deliver extended life while removing sediment, chlorine, taste, odor and organic contaminants from water, aqueous solutions or suspensions. The +CTO/2 is also widely used in filtering organic solvents. The +CTO/2 is ideal for use in residential and commercial water purification systems, food service, pre and post-RO systems. 9 3/4" long X 2 1/2" diameter. 20 per case, sold individually. Matrikx CTO/2 Brochure 

2"x10" Inline Polishing Filter FLTR-3125 Compatible.

Click Here To Visit Omnipure      Don't Know Which Inline Polishing Filter You Need? Click Here For Help. 

36 GPD TFC Reverse Osmosis Membrane MEM-1015 Compatible.

Holding Tank Air Pressure Gauge
 

The number one reason for low water flow from a reverse osmosis system is low air pressure in the holding tank. With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency. Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.  Quantity: $9.95

TDS Meter
 

HM Digital, Inc., TDS-EZ Total Dissolved Solids Meter The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!  Quantity: $22.45

 

*The replacement filters and membranes advertised on this site are not manufactured by the companies that manufacture the underlying water treatment equipment unless so noted.  Our use of registered trademarks, such as Culligan®, Kiss®, Premier Manufactured Systems® and others, is only for purposes of identifying compatible replacement filters and membranes, and does not suggest any association, sponsorship or endorsement of our our products by the manufacturers of the underlying equipment. "COMPATIBLE" Legal Disclaimer COPYRIGHT Purewater4u.com is a trademark of Purewater 4U of Las Vegas, Inc. All other products mentioned are registered trademarks or trademarks of their respective companies. Proprietary contents contained herein are the sole property of Purewater4u.com and Purewater 4U of Las Vegas, Inc. and may not be reprinted, reproduced or transmitted in any form without written permission. Purewater 4U of Las Vegas, Inc., grants permission to electronically copy and to print hard copy portions of this site for the sole purpose of placing an order with or through Purewater4u.com, or using this site as a shopping resource. Any other use of materials on this site, including reproduction for purposes other than those noted above, modification, distribution, or republication, without prior written permission from Purewater 4U of Las Vegas, Inc. is strictly prohibited. Copyright © 1998 - 2011 Purewater 4U of Las Vegas, Inc. Las Vegas, NV, USA. All rights reserved.