Premier Manufactured Systems Compatible Reverse Osmosis Replacement Filters & RO Membranes
Sediment Prefilter (Premier #5M-10, 104017 Compatible)
Purtrex' true graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translated to longer life and fewer change-outs than existing string wound or resin-bonded filters. Purtrex filters meet the requirements of the FDA for food and beverage contact. 40 per case. Sold individually. Click Here For More Info On PurTrex Filters
5-Micron Carbon Block Filter Premiere #101009 Compatible
5 Micron Nominal Filtration High Adsorptive Capacity and Efficiency Efficient Sediment Filter No Release of Carbon Fines Competitively Priced vs. GAC Filters Performance Tested and Verified by Independent Laboratory Testing
MATRIKX® +CTO/2 filters are the most widely used carbon block devices in the world and provide previously unattainable performance at the lowest price point. +CTO/2 filters simultaneously remove free chlorine and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter.
The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables a +CTO/2 filter to deliver extended life while removing sediment, chlorine, taste, odor and organic contaminants from water, aqueous solutions or suspensions. The +CTO/2 is also widely used in filtering organic solvents. The +CTO/2 is ideal for use in residential and commercial water purification systems, food service, pre and post-RO systems. 9 3/4" long X 2 1/2" diameter. 20 per case, sold individually.
Matrikx CTO/2 Brochure
GAC Carbon Prefilter (Premier #GAC-10-56, 100036 Compatible)
The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon before exiting the other end of the cartridge. An internal expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helps remove carbon fines and other suspended particles from the filtered water. CC-10 cartridges effectively provide good general-purpose drinking water filtration. 12 per case. Sold Individually. Click Here For More Info On Pentek/Ametek CC-Series Filters
6" Inline Polishing Filter (Premier #1M-6, 100004 Compatible)
Click Here To Visit Omnipure
10" Inline Polishing Filter (Premier #1M-10, 100014 Compatible)
18 GPD TFC Reverse Osmosis Membrane 110004, 560012 Compatible Replaces TFM-15
24 GPD TFC Reverse Osmosis Membrane 110005, 560014 Compatible
36 GPD TFC Reverse Osmosis Membrane 560016 Compatible
50 GPD TFC Reverse Osmosis Membrane 560018 Compatible
75 GPD TFC Reverse Osmosis Membrane 560020 Compatible
GE/Osmonics® Desal® brand residential RO membranes are built on a strong tradition of RO technology. GE/Osmonics Desal brand membranes have led the industry for years in design and manufacture of high quality membrane elements and are used as OEM in many Reverse Osmosis systems. NSF Listed Standard 58. Fits all standard reverse osmosis membrane housings. Click Here For More Info On GE/Osmonics Membranes
Holding Tank Air Pressure Gauge
With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency.
Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.
TDS Meter
The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!
Featured Product Prevent Costly Water Damage with Leak Controller! Click Here For More Information