Microline S7011 Sediment Filter.

Microline S7028 Sediment/Carbon Prefilter.

Microline S7025 Carbon Post Filter.

Microline S7206W-JG Compatible Inline Polishing Filter.

Omnipure 2" x 6" Inline Carbon Post-Filter with Quick Connect Fittings.
Customers have come to rely upon this simple but dependable inline filter for a variety of uses including ice machines, water coolers, drinking fountains, as well as under-the-sink applications and as components in reverse osmosis systems. You will find this filter in virtually any situation where better tasting water is important. NSF Listed Standard 42; Class I. 50 per case, sold individually. Click Here To Visit Omnipure    Don't Know Which Inline Polishing Filter You Need? Click Here For Help. 

Inline Polishing Filter - NO FITTINGS. Use this filter if your inline filter has fittings on the end that can be unscrewed to be installed on the new filter. S7206C-06

Omnipure CL6ROT33-B Inline Filter. S7206C-06
6" x 2" with 1/4" Female Pipe Thread (FPT) connector. Customers have come to rely upon this simple but dependable inline filter for a variety of uses including ice machines, water coolers, drinking fountains, as well as under-the-sink applications and as components in reverse osmosis systems. You will find this filter in virtually any situation where better tasting water is important. NSF Listed Standard 42; Class I. 50 per case, sold individually.

Click Here To Visit Omnipure     Don't Know Which Inline Polishing Filter You Need? Click Here For Help. 

Microline S1764RS Reverse Osmosis Membrane. 

Microline S1229RS Reverse Osmosis Membrane; 50 GPD TFC Reverse Osmosis Membrane.

NOTE: This membrane has recently been upgraded from 35 Gallons Per Day (GPD) to 50 GPD. No changes need be made to your system to use the new membrane. 

Microline Filter Housing S7029-09 (1-Piece Sump).
This Filter Sump is a replacement for systems with the 1-Piece sumps. Cannot be used as a replacement for the 2-Piece filter sumps. 

Microline Filter Housing O-Ring S3069.
This O-Ring Fits One Piece Filter Housings Only 

Microline Wrench For 1-Piece Filter Housings S3072.
This wrench is not for the 2-Piece Filter Sumps. 

Holding Tank Air Pressure Gauge
 

The number one reason for low water flow from a reverse osmosis system is low air pressure in the holding tank. With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency. Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.  Quantity: $9.95

TDS Meter
 

HM Digital, Inc., TDS-EZ Total Dissolved Solids Meter The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!  Quantity: $22.45