System manufactured by Clack/Microline.
This Reverse Osmosis System uses a standard Microline manifold with shorter filter housing sumps. To convert your system back to a standard Microline System, and save money in replacement filters, all you need to do is replace the filter housing sumps with standard Microline filter housings. This will allow you to use standard Microline Filters.
We have had a few customers with standard Microline Systems tell us that the company who came out to change filters converted their standard system to accept only the shorter, larger diameter S7125, S7128, and S1448RS RO Membrane. AND the company did this without telling the customer what they had done. The customer realized this after they had ordered standard filters from us and found that they would not fit.
We contacted the manufacturer and were told that the only difference between a Microline System that uses Standard Filters and one that uses the S71XX Series filters is the filter housing Sumps.
To replace filter S7111, replace the filter housing and o-ring and order filter S7011. To replace filter S7128, replace the filter housing and o-ring and order filter S7028. To replace filter S7125, replace the filter housing and o-ring and order filter S7025. To replace filter S1448RS, replace the filter housing and o-ring and order filter S1229RS.
Installation & Service Manual
To replace filter S7111, replace the filter housing and o-ring and order filter S7011.
To replace filter S7128, replace the filter housing and o-ring and order filter S7028.
To replace filter S7125, replace the filter housing and o-ring and order filter S7025.
To replace filter S1448RS, replace the filter housing and o-ring and order filter S1229RS.
NOTE: This membrane has recently been upgraded from 35 Gallons Per Day (GPD) to 50 GPD. No changes need be made to your system to use the new membrane.
NOTE: Our Microline membranes are OEM, NOT Compatibles!
Replacement O-Ring
Filter Housing Sump Wrench
Holding Tank Air Pressure Gauge
With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency.
Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.
The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!
Featured Product Prevent Costly Water Damage with Leak Controller! Click Here For More Information