A single test strip has been designed with two separate test pads: one for pH and the other for Total Alkalinity measurements. This test is an alternative to wet chemical tests since it gives reproducible results for each test separately. Test range is from 6.0 to 9.0 for pH and 0-360 ppm for total alkalinity.
To use, dip one test strip into a water sample for 10 seconds then remove. Immediately match the pH test pad color, then match the total alkalinity test pad color. There are no chemicals to mix, results are obtained in 30 seconds, and the test strips are safe to use with no hazardous chemicals (no MSDS required).
With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency.
Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.
TDS Meter
The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!