Ida's Iron Check   If low range detection of Fe+2 is what you need, this is the answer. Ida's Iron Check is designed to specifically react with Iron, without interference from other heavy metals that may be present. Say goodbye to dangerous, time-consuming wet-chemical kits that require extensive training and cost. This patented test is a simple dip-and-read test procedure that requires no technical training. Additionally, since there is no glass required to run the test, and since the chemical concentration is extremely low, the test is ideal for use in controlled areas. Simply dip one strip into the water for 30 seconds with a back-and-forth motion, remove the strip and shake once to remove excess water, wait 15 seconds for the color to develop, and match with the closest color match to determine your concentration of Iron.

Kit #:	Detection Level:	Test Time:	# of Tests	Order Yours Today!
481046	0, 0.005, 0.01, 0.03, 0.06, 0.1, 0.3 ppm	45 Seconds	Bottle of 25	Quantity: $13.99

Iron Check Patented technology allows for a detection sensitivity of 0.1 PPM (0.1 mg/L) on the Iron Check test strip. This test promises to be an attractive alternative to wet chemical iron tests for several reasons: There are no hazardous chemicals to mix (an MSDS is not required); Quick results are obtained in minutes; And, best of all, the Total Iron Test Strips are safe and easy to use for fast accurate results within the ranges of 0.1 to 5 PPM, which permits the measurement of typical iron levels found in well, tap, and stream water. The test is very convenient to run: dip test strip into sample for 30 seconds with constant back and forth motion, remove, and match color after 2 minutes to quantify the Total Iron level in the sample.

Kit #:	Detection Level:	Test Time:	# of Tests	Order Yours Today!
480025	0, 0.02, 0.05, 0.1, 0.2, 0.3, 0.5, 0.75, 1.0, 2.0, 5.0 ppm	2 minutes, 30 sec.	Bottle of 25	Quantity: $13.99
480125	0, 0.02, 0.05, 0.1, 0.2, 0.3, 0.5, 0.75, 1.0, 2.0, 5.0 ppm	2 minutes, 30 sec.	30 packets of 1	Quantity: $19.99

Iron Check, (Fe+2) If detection of Fe+2 is what you need, this is the answer. SenSafe Iron Check II is designed to specifically react with Iron, without interference from other heavy metals that may be present. Say goodbye to dangerous, time-consuming wet-chemical kits that require extensive training and cost.  This patented test is a simple dip-and-read test procedure that requires no technical training. Additionally, since there is no glass required to run the test, it is ideal for use in controlled areas. Simply dip one strip into the water for 5 seconds with a back-and-forth motion, remove the strip and shake once to remove excess water, wait 2 minutes for the color to develop, and match with the closest color match to determine your concentration of Iron.

Kit #:	Detection Level:	Test Time:	# of Tests	Order Yours Today!
481331	0, 0.1, 0.3, 1.0, 5.0 ppm	2 Minutes, 5 Seconds	Bottle of 25	Quantity: $13.99
480331	0, 0.1, 0.3, 1.0, 5.0 ppm	2 Minutes, 5 Seconds	30 Packets of 1	Quantity: $19.99

With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency.

Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance. 

TDS Meter
HM Digital, Inc., TDS-EZ Total Dissolved Solids Meter

The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters! 

International Ordering Information RETURN POLICY TDS Meter Instructions Service Manuals & Downloads Testimonials Company Info Sales Info Contact Us Links E-GoldTM is 100% backed by gold bullion held in recognized repositories  All transactions are on-line with access requiring account number, passphrase, Turing number, and IP address confirmation. More Secure Than Credit Cards! Create a no-obligation e-gold™ account *The replacement filters and membranes advertised on this site are not manufactured by the companies that manufacture the underlying water treatment equipment unless so noted.  Our use of registered trademarks, such as Culligan®, Kiss®, Premier Manufactured Systems® and others, is only for purposes of identifying compatible replacement filters and membranes, and does not suggest any association, sponsorship or endorsement of our our products by the manufacturers of the underlying equipment. "COMPATIBLE" Legal Disclaimer COPYRIGHT Purewater4u.com is a trademark of Purewater 4U of Las Vegas, Inc. All other products mentioned are registered trademarks or trademarks of their respective companies. Proprietary contents contained herein are the sole property of Purewater4u.com and Purewater 4U of Las Vegas, Inc. and may not be reprinted, reproduced or transmitted in any form without written permission. Purewater 4U of Las Vegas, Inc., grants permission to electronically copy and to print hard copy portions of this site for the sole purpose of placing an order with or through Purewater4u.com, or using this site as a shopping resource. Any other use of materials on this site, including reproduction for purposes other than those noted above, modification, distribution, or republication, without prior written permission from Purewater 4U of Las Vegas, Inc. is strictly prohibited. Copyright © 1998 - 2007 Purewater 4U of Las Vegas, Inc. Las Vegas, NV, USA. All rights reserved.