Yes! We Ship Worldwide
To Most Countries!
The Low Range H2S Test has
detection limits Fr.om 0 to 2ppm with a low sensitivity
of 0.3ppm. With this test,
the strip isinserted into the aqueous sample for 20 seconds with back and
forth motion. After 20 seconds, the strip is removed and discarded.
The remaining discolored sample is compared to the color chart specific
for this test.
ITS has developed a test
strip for Hydrogen Sulfide with test results in under 30 seconds. No laboratory
equipment is needed. Simply dip the test strip in the water sample to be
tested for one second, shake off the excess and compare your results to
the color chart provided. ITS’ Hydrogen Sulfide test strip has
comparative levels of 5, 10, 20, 30, 40, 50, 60, and 80 ppm.
Holding Tank Air Pressure
With this holding tank air
pressure gauge you can easily check and maintain the holding tank air pressure
to the required 8 PSI of air pressure to get your system up and running
at its' peak efficiency.
Specially designed for use
with low air pressure applications, this Holding Tank Air Pressure Gauge
is a must for Reverse Osmosis Systems maintenance.
The HM Digital EZ TDS meter
is a must for reverse osmosis (RO) filter and membrane monitoring. Know
when to change your pre-RO filters to extend the life of the RO membrane.
Designed for home use, this pocket TDS meter comes with a 2 year limited
manufacturer's warranty.Designed for the long haul, this compact TDS (Total
Dissolved Solids) meter has been manufactured with a tough housing and
large, easy to read LCD screen. It sports a measurment range of 0 to 9990
parts-per-million. Flip it over and the back side sports a handy color
coded chart which classifies the water you are testing.The TDS-EZ is perfect
for monitoring your reverse osmosis (RO) output water. Take the guess-work
out of knowing when to change your filters!