Purtrex 5-Micron Sediment Filter 93023
Purtrex depth filters are an exceptional value for applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt holding capacity.

Purtrex' true graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translated to longer life and fewer change-outs than existing string wound or resin-bonded filters. Purtrex filters meet the requirements of the FDA for food and beverage contact. 40 per case. Sold individually.
Click Here For More Info On PurTrex Filters 

CTO Carbon Block Filter

Kx Matrikx CTO/2 Carbon Block Filter; 32-250-125-975.

5 Micron Nominal Filtration
High Adsorptive Capacity and Efficiency
Efficient Sediment Filter
No Release of Carbon Fines
Competitively Priced vs. GAC Filters
Performance Tested and Verified by Independent Laboratory Testing

MATRIKX® +CTO/2 filters are the most widely used carbon block devices in the world and provide previously unattainable performance at the lowest price point. +CTO/2 filters simultaneously remove free chlorine and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter.

The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables a +CTO/2 filter to deliver extended life while removing sediment, chlorine, taste, odor and organic contaminants from water, aqueous solutions or suspensions. The +CTO/2 is also widely used in filtering organic solvents. The +CTO/2 is ideal for use in residential and commercial water purification systems, food service, pre and post-RO systems. 9 3/4" long X 2 1/2" diameter. 20 per case, sold individually. Matrikx CTO/2 Brochure 

10" Inline Polishing Filter

Omnipure CL10ROT33-B Inline Filter.
10" x 2" with 1/4" Female Pipe Thread (FPT) connector. Customers have come to rely upon this simple but dependable inline filter for a variety of uses including ice machines, water coolers, drinking fountains, as well as under-the-sink applications and as components in reverse osmosis systems. You will find this filter in virtually any situation where better tasting water is important. NSF Listed Standard 42; Class I. 25 per case, sold individually.

Click Here To Visit Omnipure      Don't Know Which Inline Polishing Filter You Need? Click Here For Help. 

18 GPD TFC Reverse Osmosis Membrane

GE Osmonics Desal 18 Gallon Per Day (GPD) TFC Reverse Osmosis Membrane. #1220188
GE/Osmonics® Desal® brand residential RO membranes are built on a strong tradition of RO technology. GE/Osmonics Desal brand membranes have led the industry for years in design and manufacture of high quality membrane elements and are used as OEM in many Reverse Osmosis systems. NSF Listed Standard 58. Fits all standard reverse osmosis membrane housings.
Click Here For More Info On GE/Osmonics Membranes 

Holding Tank Air Pressure Gauge
 

The number one reason for low water flow from a reverse osmosis system is low air pressure in the holding tank. With this holding tank air pressure gauge you can easily check and maintain the holding tank air pressure to the required 8 PSI of air pressure to get your system up and running at its' peak efficiency. Specially designed for use with low air pressure applications, this Holding Tank Air Pressure Gauge is a must for Reverse Osmosis Systems maintenance.  Quantity: $9.95

TDS Meter
 

HM Digital, Inc., TDS-EZ Total Dissolved Solids Meter The HM Digital EZ TDS meter is a must for reverse osmosis (RO) filter and membrane monitoring. Know when to change your pre-RO filters to extend the life of the RO membrane. Designed for home use, this pocket TDS meter comes with a 2 year limited manufacturer's warranty.Designed for the long haul, this compact TDS (Total Dissolved Solids) meter has been manufactured with a tough housing and large, easy to read LCD screen. It sports a measurment range of 0 to 9990 parts-per-million. Flip it over and the back side sports a handy color coded chart which classifies the water you are testing.The TDS-EZ is perfect for monitoring your reverse osmosis (RO) output water. Take the guess-work out of knowing when to change your filters!  Quantity: $22.45

 

*The replacement filters and membranes advertised on this site are not manufactured by the companies that manufacture the underlying water treatment equipment unless so noted.  Our use of registered trademarks, such as Culligan®, Kiss®, Premier Manufactured Systems® and others, is only for purposes of identifying compatible replacement filters and membranes, and does not suggest any association, sponsorship or endorsement of our our products by the manufacturers of the underlying equipment. "COMPATIBLE" Legal Disclaimer COPYRIGHT Purewater4u.com is a trademark of Purewater 4U of Las Vegas, Inc. All other products mentioned are registered trademarks or trademarks of their respective companies. Proprietary contents contained herein are the sole property of Purewater4u.com and Purewater 4U of Las Vegas, Inc. and may not be reprinted, reproduced or transmitted in any form without written permission. Purewater 4U of Las Vegas, Inc., grants permission to electronically copy and to print hard copy portions of this site for the sole purpose of placing an order with or through Purewater4u.com, or using this site as a shopping resource. Any other use of materials on this site, including reproduction for purposes other than those noted above, modification, distribution, or republication, without prior written permission from Purewater 4U of Las Vegas, Inc. is strictly prohibited. Copyright © 1998 - 2011 Purewater 4U of Las Vegas, Inc. Las Vegas, NV, USA. All rights reserved.